Setup

Setting Up Your Quiet Punch

Welcome! In your package you will find 2 telescoping bars, punching bag, phone holder, and punch tracker (if purchased the tech version). Please see the quick setup video below and follow the individual steps for Using the Phone Holder and Attaching the Punch Tracker

*In the video please be sure to take note that you need to use BOTH hands to rotate the bar. This makes sure that you get the necessary tension to prevent the bar from sliding.


Using the Phone Holder

The phone holder is meant to be wrapped around one of your Quiet Punch bars and then you use the webbing to hold your phone. This is a great way to experience the app. The holder fully rotates so you can be in both portrait and landscape mode.

Phone Holder Angle 1

Phone Holder Angle 2

Attaching the Punch Tracker (if purchased the tech version)

Please use the supplied screws to secure the sensor to the back of the bag. Please use a Philips Head screwdriver (ideally a power screw driver) and press down hard as you screw the screw into the back of the bag. Once the screw attaches you will feel it bite and then you can continue screwing until it is firmly attached to your bag. 

 

Screws Attachment for Sensor


Non-Slip Discs

Perfect for glossy doorways and when you notice that even after significant tightening of the bars that they still seem to slide down when punching.

 


Jump Rope Length

The best length for a jump rope is to make sure that if you are stepping on the rope, the handles should reach just under your armpits.

 


Be sure to download our App



Using the Punch Tracker

Only purchased the Basic version and you don't have a punch tracker? You can upgrade anytime by going here: Punch Tracker

Please make sure that your sensor is fully charged. The red light is on when it is charging and turns off when it is fully charged. Press the button once on the sensor. (The sensor will turn off automatically after 10 minutes of inactivity)

*A full charge should last you at least 20-30 workouts.

Android

Open up the Play app and the app will automatically search for the sensor. It will display the sensor that it finds. Click on the name of the sensor that it finds and it will connect to it. See this demo video for an example: https://www.youtube.com/watch?v=qv3rDGakoAc The app will stay paired to the sensor until you click the button to search again and this will un-pair it.

iPhone

Click on Settings Scroll down to find the Quiet Punch Play app Make sure that you enable Bluetooth (this is Bluetooth specific to the app not your Bluetooth settings overall) Open up the Play app and the app will automatically search for the sensor. It will auto connect to every screen. To test that it is working properly, click on the Training -> Free Style screen and you should see a green box that says connected so you know that the sensor is working properly.


Setting Up Your Heavy Bag Sensor

 


Throwing Hooks and Uppercuts